In pools exposed to direct sunlight, the free xylop will burn under the influence of the ultraviolet rays. This requires adding human pappads first. To reduce this emission, stabilize the free chlorine. The product prevents its burning and helps prolong the action of chlorine.
Application:
It only applies to outdoor pools. The average amount of waste is placed in the computer safe, the overflow tray or the skim basket. The presence of cyanic acid in the water should not exceed 75 mg/l. The optimal level is between 30 and 60 mg/l.

Dosage:
After the regulation of the pH in the range of 7.0 - 7.4, and of the free chlorine in the levels of 0.3 - 0.5 mg/l, you can use the chlorine stabilizer in amounts of 350 g per 10 m3 of water (10,000 liters) . Measure the correct amount and place in the overflow (skimmer), turning on the filtration. Slow-dissolving granules gradually dissolve in water.
The next dose of the preparation is determined by the amount of added fresh water in the pool, the recommended dose being 35 g per 1 m3
(1000 liters) of fresh water.
The dose can be dissolved in warm water in a plastic container (bucket, basin, watering can, can) and the resulting solution is poured along the walls in the pool after filling it with water.